Clearing A Bank; Scanning Stored Channels - Albrecht AE125H Mode D'emploi

• 3 sec - waits 3 seconds for a reply then resumes.
• 4 sec - waits 4 seconds for a reply then resumes.
• 5 sec - waits 5 seconds for a reply then resumes.
5. Press Pgm/E to save and return to the Channel menu
DELETING CHANNELS
You can delete all programming for a channel.
1. Press Hold then enter the channel number to delete.
2. Press Pgm/E to enter the Channel menu. (You can also
press Hold and scroll to the channel; press Func then
Pgm/E.)
3. Scroll to select Delete Channel and press Pgm/E.
4. At Confirm Delete?, press Pgm/E to delete the channel or
.Clr to cancel and return to the Channel menu.

Clearing a Bank

You can delete all channels in a bank.
1. Press Hold to select any channel in the bank, then enter that
channel number.
2. Press Pgm/E to enter the Channel menu. (You can also press
Hold and scroll to the channel; press Func then Pgm/E.)
3. Scroll to select Clear Bank and press Pgm/E.
4. At Confirm Clear?, press Pgm/E to clear the bank or . Clr to
cancel and return to the Channel menu.

Scanning stored Channels

Press Scan to begin scanning channels.
The scanner scans through all unlocked channels in the enabled banks
in channel order. When the scanner finds a transmission, it stops on it.
When the scanning of all normal banks ends, the scanner scans a
channel storage bank that is named Close Call Hits (if enabled). This is a
storage bank that automatically stores found frequencies with any Close
English 93