Turning On The Scanner - Albrecht AE125H Mode D'emploi

L/O/
/
Pgm/E
Note: Turn SCROLLCONTROL to scroll up and down through menu
selections.

Turning on the Scanner

Note: Make sure the scanner's antenna is connected before you turn it
on.
1. You can select the band plan (Band Plan 1 or 2) when you
turn on the scanner. When you press and hold
second to turn on the scanner, also press and hold 1 for Band
Plan 1 or 2 for Band Plan 2.
2. If the scanner is new or has been reset, the default mode is
Scan Hold with all banks enabled and Close Call Do-Not-
Disturb active. Otherwise, the scanner displays the last mode
the scanner was in before it was powered down.
82
• Temporarily lock out a channel or
search frequency (press once).
• Permanently lock out a channel or
search frequency (press twice).
• Unlock a locked out channel or
search frequency.
• Unlock all locked out settings of the
enabled channel banks or search
frequencies (press and hold).
• Turn scanner on and off (press and
hold).
• Turn backlight on and off.
• Select input data or a menu item.
• Access a channel through its
channel number.
English
Lock or unlock the
keypad.
Enter the Dis-
play/Charge menu.
• Enter Channel
Programming menu.
• Quickly save
frequencies in
various modes.
for 1