Ctcss/Dcs Search; Programming Custom Search Ranges - Albrecht AE125H Mode D'emploi

and then automatically resumes searching. (Default= 2 seconds). This
setting affects both Search and Close Call.
1. Press Func then Pgm/E in Service, Custom, or
Quick Search/Search Hold mode to view the Search menu.
2. Scroll to Set Delay and press Pgm/E.
3. Turn SCROLL CONTROL to select the delay time from the
following options:
•
•
•
•
•
•
•
•
4. Press Pgm/E to save and return to previous menu.

CTCSS/DCS Search

This setting controls whether the scanner will search for a subaudible
tone when it stops on a transmission during a Search. (Default = On).
This setting affects both Search and Close Call.
1. Press Func then Pgm/E in any Service, Custom, or
Quick Search/Search Hold mode to view the Search menu.
2. Turn SCROLL CONTROL to CTCSS/DCS Search and press
Pgm/E.
3. Turn SCROLL CONTROL to select one of the following
settings:
•
Search Off
•
Search On
4. Press Pgm/E to save and return to previous menu.

Programming Custom Search Ranges

You can define each search range used during a Custom Search.
-10 sec - resumes after 10 seconds.
-5 sec - resumes after 5 seconds.
0 sec - resumes immediately.
1 sec - waits 1 second for a reply then resumes.
2 sec - waits 2 seconds for a reply then resumes.
3 sec - waits 3 seconds for a reply then resumes.
4 sec - waits 4 seconds for a reply then resumes.
5 sec - waits 5 seconds for a reply then resumes.
English 101