Albrecht AE125H Mode D'emploi page 94

Call mode. You will see Close Call Hits on the display. If the Close Call
Hits bank is empty, the scanner does not scan this bank.
In Scan mode, the upper line displays the current channel bank number
and the lower line displays and scrolls SCAN from right to left with the
direction indicator (↑or ↓).
Enabled scan banks appear on the lowest line. Disabled scan bank
numbers are not displayed. The currently scanned bank number flashes.
•
You can turn scan banks on/off by pressing 1-9 or 0, but one
scan bank must always be enabled. If you turn off all scan
banks, the scanner will display Nothing to Scan. You can turn
Close Call Hits bank on/off by pressing .Clr.
•
If you want to change the scan direction or if it is a long
transmission and you want to continue scanning, turn the
SCROLL CONTROL or press Scan.
When the scanner finds a transmission, it stops on it. When the
transmission ends, the scanner resumes scanning according to the
delay setting for each channel.
•
To hold on a channel, press Hold.
•
To step through the channels, turn the SCROLL CONTROL in
Hold mode. Press Hold to resume.
While monitoring a transmission, the upper line displays the current bank
and bank channel number (or name if tagged) and the lower line
displays the channel number in the scanner and frequency with the
direction indicator (↑or ↓).
appears in the display if it is a priority channel. The modulation, Priority
P
mode icon (if Priority is enabled), and the Close Call icon (if CC Pri or
CC-DND is enabled) also displays.
Any CTCSS/DCS received blinks in CTCSS/DCS search and appears
solid if programmed.
Numbers at the bottom of the display show the selected scan banks. The
currently scanned bank number flashes in Receive mode.
•
To temporarily lock out a channel, press L/O.
94 English