Albrecht AE125H Mode D'emploi page 69

Signal Strength Meter- shows the signal strength for more powerful
transmissions.
Flexible Antenna with BNC Connector- provides adequate reception in
strong signal areas and is designed to help prevent antenna breakage.
You can also connect an external antenna for better reception.
Memory Backup- keeps the frequencies stored in memory for an
extended time if the scanner loses power.
Three Power Options- let you power the scanner using the included two
AA rechargeable or alkaline batteries or the supplied USB cable.
Built-In Charger- allows you to charge Ni-MH batteries in the scanner
using a USB port on any computer and the supplied USB cable.
Key Confirmation Tones-You can turn on/off a tone that sounds when
you perform an operation correctly or if you make an error.
Key Lock- lets you lock the scanner's keys to help prevent accidental
changes to the scanner's programming.
Battery Save- works when there is no transmission for 1 minute in Scan
Hold mode and any Search Hold mode (without Priority Scan and Close
Call).This feature turns off RF power for 1 second and turns on it for
300ms to extend the battery life.
Battery Low Alert– the icon will blink in the display and a tone
warns you every 15 seconds when the battery power gets low.
Frequency Range
This table lists the frequency ranges, default step frequency, default
modulation, and type of transmissions you can hear for each range.
English 69