Albrecht AE125H Mode D'emploi page 68

Service Banks- frequencies are preset in 7 separate Emergency,
Freenet, PMR, Marine, Aircraft, CB radio and HAM radio banks to make
it easy to locate specific types of calls and search any or all of these
banks.
Priority Scan with Do Not Disturb- lets you program one channel in
each bank (10 in all) and then have the scanner check each channel
every 2 seconds while it scans the banks so you don't miss
transmissions on those channels. Do Not Disturb keeps the scanner
from interrupting transmissions during receiving.
Priority Plus Scan- you can set the scanner so it scans only the priority
channels.
Scan/Search Delay/Resume- controls whether the scanner pauses at
the end of the transmission to wait for a reply. You can set the Delay time
for each Channel, Close Call Search, Custom Search, and Service
search. You can also set a negative delay where the scanner stops on
transmissions for a set time then automatically resumes.
Custom Search- lets you program up to 10 Custom Search Ranges and
search any or all of these ranges.
Quick Search- allows you to enter a frequency and start searching up or
down from that frequency.
Turbo Search- increases the search speed from 100 to 300 steps per
second automatically for bands with 5 kHz steps.
Search Lockouts- you can lock up to 200 search frequencies:
100 temporary frequencies and 100 permanent frequencies in Custom
Search, Service Search, Close Call Search, or Quick Search Modes.
Frequency Step- Lets you select a frequency step (5, 6.25, 8.33,10,
12.5 or 20 kHz) each band coverage band.
Modulation- Lets you select a modulation (AM or FM) each band
coverage band.
Display Backlight-You can turn on/off the LCD backlight, set it operate
on squelch only, key press only, or both.
68 English