Privacy Code Scan / Decode; Key Lock; Display Backlight - Albrecht Tectalk Action Pro Mode D'emploi

The Function Menu, Monitor and Volume Up/Down are disabled whilst scanning.
To increase battery life, use the scan mode sparingly.

16) Privacy Code Scan / Decode

This radio has Privacy code scan to determine which Privacy Code (CTCSS) is in
use on the current channel.
To activate the privacy code scan press the MODE button until the privacy code
number flashes, then press and hold the Compander/Scan button. The Scan icon
will appear when the privacy code scan is active.
The radio will scan through the 38 privacy codes (CTCSS). If your radio detects a
valid signal the scan will pause for 5 seconds.
If you press the PTT or CALL button when your radio detects a signal, the radio
will transmit on the same privacy code. Scanning will resume after approximately
15 seconds. Press the UP or DOWN button to resume scanning immediately.
If you press the PTT or CALL button during scanning, the radio will return to your
original privacy code. Scanning will resume after approximately 15 seconds.
The Function Menu and Volume up/down are disabled whilst scanning. To
increase battery life, use the scan mode sparingly.

17) Key Lock

To avoid changing the channel or function settings accidentally this radio has a
lock function. To activate or deactivate the lock press and hold the FUNCTION/
LOCK button for about 2 seconds. The Key Lock icon will appear when the Key
Lock is active. The Power, PTT, Lamp/ Monitor, Call and Volume adjustment are
unaffected by the Lock.

18) Display Backlight

This display backlight will illuminate for approximately 5 seconds whenever any
key is pressed. The call key, PTT key and lamp key do not work for activating this
backlight.
18