Changing The Quantity Of Milk - Franke FMY 45 CM XS Manuel D'installation Et D'utilisation

Remove the hot water spout (Fig. 13) and attach
X
the milk container to the nozzle (Fig. 32).
Position the milk spout as shown in Fig. 33 and
Fig. 8
X
then place a sufficiently large cup under the
coffee and milk spouts.
Press the icon (B12). CAPPUCCINO..." is
X
displayed and after a few seconds, frothed milk
flows out of the milk spout into the cup below
(Delivery stops automatically).
The appliance delivers coffee.
X
The cappuccino is now ready. Sweeten to taste
„
and, if desired, sprinkle the froth with a little
Fig. 12
cocoa powder.
Notes:
– While making cappuccino, the flow of frothed milk
or coffee can be interrupted by pressing the
icon (B12).
– If the milk in the container finishes while
delivering frothed milk, remove the container and
add milk. Then re-attach it and press the
Fig. 16
(B12) to request cappuccino again.
– The following cleaning operations should be
performed each time a milk beverage is delivered.
To ensure the complete cleanliness and hygiene
Fig. 24 Fig. 24
of the milk frother, always clean the circuits in the
milk container lid after making cappuccino.
"PRESS CLEAN!" flashes on the display.
„
Place a recipient under the milk spout (Fig. 33).
X
Press the CLEAN button on the lid (C3) (see
X
Fig. 20
page 8) and hold down for at least 5 seconds
(Fig. 33) to start the cleaning function.
The appliance displays the message
„
"CLEANING" above a progressive bar.
Fig. 28 Fig. 28
Fig. 9 Fig. 10
Fig. 13 Fig. 32 Fig. 32 Fig. 14
You should not release the CLEAN button until
X
the bar is complete indicating that cleaning is
concluded.
When the CLEAN button is released, the
„
function stops.
After cleaning, remove the milk container and
„
place in the refrigerator. The milk should not
Fig. 36 Fig. 36
Fig. 17 Fig. 18
FMY 45 CM XS
Fig. 9 Fig. 10
„
Changing the quantity of milk and coffee for
cappuccino
Fig. 13 Fig. 14
The appliance is set by default to automatically
deliver a standard cappuccino. To change these
quantities, proceed as follows:

Changing the quantity of milk

Fill the container with milk up to the maximum
X
level indicated on the container.
Press the
X
then press the icons
icon
until "PROGRAM CAPPUCCINO" is displayed.
Fig. 17 Fig. 18
Fig. 25 Fig. 25 Fig. 26 Fig. 26
2
Fig. 21 Fig. 22
1
Press the
X
„
Press the
X
Fig. 29 Fig. 29 Fig. 30 Fig. 30
Fig. 11
Select the quantity of milk required by pressing
X
the
„
Press the
X
(B6) to cancel the operation).
Press the
X
menu.
Fig. 33 Fig. 33 Fig. 15 Fig. 34 Fig. 34
12 12
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
1 1
Fig. 24
Fig. 37 Fig. 37 Fig. 38 Fig. 38
Fig. 19
– 21 –
2
1
be left out of the refrigerator for more than
15 minutes. Remove the milk container and
always clean the steam nozzle with a clean
Fig. 11
cloth.
To change the quantity of coffee or frothed
milk the appliance delivers automatically into
the cup, proceed as described in the section
"Changing the quantity of coffee and milk for
cappuccino".
Fig. 15
icon (B2) to enter the menu (Fig. 22),
Fig. 19
Fig. 27 Fig. 27
1 1
2 2
Fig. 8
Fig. 23
icon (B9) to confirm.
"PROGRAM MILK" is displayed.
icon (B9) again.
Fig. 31 Fig. 31
icons (B7) and (B8).
The progress bar shows the quantity of milk
selected.
icon (B9) to confirm (or the
Fig. 12
icon (B6) (Fig. 25) twice to exit the
Fig. 35 Fig. 35
Fig. 16
Fig. 25
Fig. 39 Fig. 39
(B7) and (B8) (Fig. 9)
Fig. 9
icon
Fig. 13
Fig. 17
Fig. 26
1
2
EN
Fig. 10
Fig. 14
Fig. 18
Fig. 27