Setting The Clock; Setting Auto-Start Time - Franke FMY 45 CM XS Manuel D'installation Et D'utilisation

EN
Press the icons
X
time after which the appliance will go off
(after 1/2 hour, 1 hour, 2 hours).
Press the icon (B9) to confirm.
X
Press the icon
X

Setting the clock

Press the icon (B2) to enter the menu and then
X
the icons
is displayed.
Press the icon (B9).
X
Use the icons
X
then press the
Use the icons
X
minutes, then press the
Press the icon
X

Setting auto-start time

This function programmes the time the machine will
come on automatically.
Make sure the clock on the appliance has been
X
set.
Press the icon (B2) to enter the menu and then
X
the icons
is displayed.
Press the icon (B9).
X
Use the icons
X
start time, then press the
Use the icons
X
minutes, then press the
Auto-start
Press the icons
X
the auto-start function until "AUTO START" is
displayed.
Press the icon (B9) to confirm. The symbol
X
appears on the display.
Press the icon
X
To deactivate the automatic start-up function,
X
press the (B2) icon, then press the
and (B8) icons until the appliance displays the
message AUTO START. Press the
CONFIRM will appear on the display. Press
deactivate and the symbol
Changing coffee temperature
To change coffee temperature, proceed as follows:
Press the icon (B2) to enter the menu
X
and then the icons
"TEMPERATURE" is displayed.
Press the icon (B9).
X
(B7) and (B8) to set the
(B6) to exit.
(B7) and (B8) until "SET CLOCK"
(B7) and (B8) to set the hour,
icon (B9) to confirm.
(B7) and (B8) to set the
icon (B9) to confirm.
(B6) to exit the menu.
(B7) and (B8) until "START TIME"
(B7) and (B8) to set the auto-
icon (B9) to confirm.
(B7) and (B8) to set the
icon (B9) to confirm.
(B7) and (B8) to activate
(B6) to exit the menu.
(B9) icon.
will disappear.
(B7) and (B8) until
FMY 45 CM XS
Press the icons
X
required coffee temperature from low, medium
and high.
Press the
X
temperature selected.
Press the icon
X
Setting water hardness
The operating period can be extended if required,
making descaling less frequent by programming the
machine on the basis of the real lime content in the
water used.
Proceed as follows:
Remove the "Total Hardness Test" strip (attached
X
to page 2) from its packaging then dip it fully in
the water for a few seconds,
Then remove and wait about 30 seconds (until it
X
changes colour and forms red squares).
Turn the appliance on by pressing the On-Off/
X
stand-by button (A7).
Press the
X
then the icons
HARDNESS" is displayed. Press the
Press the icons
X
number coincides with the number of red squares
on the test strip (for example, if there are 3 red
squares on the test strip, select the message
"WATER HARDNESS 3".
Press the
X
The coffee maker is now programmed to provide
X
the descale warning when actually necessary.
Descaling
IMPORTANT
– Descaler contains acids. Respect the safety
warnings provided by the manufacturer and given
on the descaler pack.
– Use the descaler recommended by the
(B7)
manufacturer only. Use of other descalers
invalidates the guarantee. Failure to descale
the appliance as described also invalidates the
to
guarantee.
– Before descaling, make sure the water softener
filter has been removed.
When "PLEASE DESCALE!" is displayed, the machine
requires descaling. Proceed as follows:
Make sure the machine is ready.
X
Attach the hot water spout (C7) to the nozzle (A10).
X
Press the
X
the icons
displayed.
– 10 –
(B7) and (B8) to select the
button (B9) to confirm the
(B6) to exit the menu.
icon (B2) to enter the menu and
(B7) and (B8) until "WATER
(B7) and (B8) until the
icon (B9) to confirm.
icon (B2) to enter the menu and then
(B7) and (B8) until "DESCALE" is
icon (B9).