Programming The Temperature; Programming The Water Quantity; Programming The Milk Quantity - Franke SAPHIRA Mode D'emploi

16.2.

Programming the temperature

§
Press the + button (27) to reach the TEMPERATURE function.
§
Display:
§
Display:
§
Press the desired product button.
§
Display:
§
Select the desired temperature (high or normal) using the + (27) or – (28) button.
§
To save the setting, press the PROG. button (26).
§
Display:
§
Display:
§
Press another product button, the + button (27) to reach the next function or the EXIT button (30) to
exit the programming.
16.3.

Programming the water quantity

§
Press the + button (27) to reach the WATER QUANTITY function.
§
Display:
§
Display:
§
Press the desired product button.
§
Display:
§
§
You can adjust the value by pressing the + (27) or – (28) button.
§
To save the setting, press the PROG. button (26).
§
Display:
§
Display:
§
Press another product button, the + button (26) to reach the next function or the EXIT button (30) to
exit the programming.
16.4.

Programming the milk quantity

§
Press the + button to reach the MILK QUANTITY function.
§
Display:
§
Display:
§
Press the button milk foam (25) or cappuccino(6)
§
Display:
§
By pressing the + (27) or – (28) button, you can adjust the time (delivery time 3- 60 sec.)
§
To save the setting, press the PROG. button (26).
§
Display:
§
Display:
§
Press another product button, the + button (27) to reach the next function or the EXIT button (30) to
exit the programming.
Instruction for use Saphira
ADJUST
TEMPERATURE
SELECT
PRODUCT
(Selected product)
TEMP. NORMAL
ADJUST
TEMPERATURE
SELECT
PRODUCT
ADJUST
WATER QTY.
SELECT
PRODUCT
(Selected product)
WATER 90 ML
ADJUST
WATER QTY.
SELECT
PRODUCT
ADJUST
MILK QTY.
SELECT
PRODUCT
(Selected product)
10 SEC.
ADJUST
MILK QTY.
SELECT
PRODUCT
Page 45 18.06.04 / Rev D / Maks 4 / PPB