Control Panel - Franke FMY 45 CM XS Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 57

Control panel

B2
B6
IMPORTANT
– Only the icons relating to the controls enabled for
the particular function currently being used will be
lit on the touch screen.
– A light touch is enough to activate the icon.
B1. Display: guides the user in using the appliance.
B2.
icon to activate or deactivate menu parameter
setting mode.
B3.
icon rinse.
B4.
icon to select the coffee taste.
B5.
icon to select the type of coffee.
(espresso, small cup, medium cup, large cup, mug)
B6.
icon to exit the selected mode.
B7-B8.
icons to scroll forwards or
backwards through the menu and display
the various modes.
B9.
icon to confirm the selected function.
B10.
icon to deliver a cup of coffee.
B11.
icon to deliver two cups of coffee.
B12.
icon to deliver cappuccino.
B13.
icon to deliver hot water.
Changing and setting menu parameters
When the appliance is ready, you can use the internal
menu to modify the following parameters and
functions:
– Choose language
– Shut-off time
– Set clock
– Start time
– Auto-start
– Temperature
– Water hardness
– Program coffee
– Program cappuccino
– Program water
B3
B4
B7
B8
FMY 45 CM XS
B5
B10
B11
B9
– Descale
– Reset to default
– Statistics
– Install filter
– Reset filter
– Buzzer
– Contrast
Setting the language
To change the language on the display, proceed as
follows:
Press the
X
"CHOOSE LANGUAGE" is displayed.
Press the
X
Press the icons
X
required language is displayed.
Press the
X
Press the icon
X
IMPORTANT: If you choose the wrong
language, you can access the menu directly to
modify the parameter.
Press the
X
7 seconds until the appliance displays the various
languages.
Choose the required language as described in the
X
section "Using the appliance for the first time".
Changing the length of time the appliance
remains on
The appliance is set by default to go off automatically
30 minutes after the last coffee has been made.
To change this interval (max. 120 min), proceed as
follows:
Press the
X
the icons
TIME" is displayed.
Press the
X
– 9 –
B1
B12
B13
icon (B2) to enter the menu
icon (B9).
(B7) and (B8) until the
icon (B9) to confirm.
(B6) to exit the menu.
icon button (B2) for at least
icon (B2) to enter the menu and then
(B7) and
(B8) until "SHUT-OFF
icon (B9) to confirm.
EN

Publicité

Table des Matières
loading

Table des Matières