Changing The Quantity Of Hot Water; Making Cappuccino - Franke FMY 45 CM XS Manuel D'installation Et D'utilisation

EN
Press the icon (B9) again and hot water is
X
delivered from the water spout into the container
underneath.
You should not deliver hot water for more than 2
X
minutes at a time.
To interrupt, press the
X
(B6).
The appliance stops delivery once the set
„
quantity is reached.

Changing the quantity of hot water

The machine is set by default to automatically
delivery 150 ml of hot water. To change these
Fig. 10 Fig. 11
quantities, proceed as follows:
Place a container underneath the water spout
X
(Fig. 12).
Fig. 14 Fig. 15
Press the icon (B2) to enter the menu (Fig. 22)
X
or press the icons
"PROGRAM HOT WATER is displayed.
Fig. 24
Fig. 18 Fig. 19
Fig. 8
Fig. 22 Fig. 23
Fig. 28
Press the icon (B9) to confirm.
X
Select the required quantity of water by pressing
X
the icons (B7) and (B8).
The progress bar shows the quantity of water
„
selected.
Press the icon (B9) to confirm (or the
X
(B6) to cancel the operation.
Fig. 12
Press the icon
X
menu.
Fig. 32
The appliance is now reprogrammed with the
„
new settings and is ready.
Fig. 16
Fig. 36
icon (B13) or the
2
1
Fig. 8 Fig. 9
Fig. 24
Fig. 12 Fig. 13
Fig. 28
(B7) and (B8) (Fig. 9) until
Fig. 25
Fig. 16 Fig. 17
Fig. 32
Fig. 24 Fig. 25
Fig. 9 Fig. 10
Fig. 29
Fig. 20 Fig. 21
Fig. 36
Fig. 28 Fig. 29
Fig. 13 Fig. 14
(B6) (Fig. 25) twice to exit the
Fig. 33
Fig. 17 Fig. 18
Fig. 32 Fig. 33
Fig. 37
FMY 45 CM XS

Making cappuccino

IMPORTANT:
Set the quantity of coffee you want to use to make
the cappuccino in the "Program cappuccino" function
in the menu.
icon
Select the taste of the coffee you want to use
X
to make the cappuccino by pressing the
(B4).
Remove the lid of the milk container.
X
Fill the container with about 100 grams of milk for
X
each cappuccino to be prepared (Fig. 30). Never
exceed the MAX level (corresponding to about
750 ml) marked on the container. You should
ideally use skimmed or semi-skimmed milk at
Fig. 10
refrigerator temperature (about 5°C).
Fig. 25
Fig. 14
Fig. 29
Make sure the intake tube is correctly inserted in
X
the rubber washer (Fig. 31), then replace the milk
container lid.
Fig. 26
1
2
2
Fig. 18
1
Fig. 33
12
1
2
3
Fig. 26 4
Fig. 11
5
6
Fig. 30
7
8
1
9
10
Position the frothed milk regulator (C1) between
11
X
12
1
the words CAPPUCCINO and CAFFELATTE printed
on the milk container lid. The quantity of froth
2
can be adjusted by moving the regulator towards
the word CAFFELATTE for a denser froth. Moving
Fig. 22
icon
Fig. 37
it towards the word CAPPUCCINO obtains a less
dense froth (Fig. 41).
Fig. 30
Fig. 15
Fig. 34
12
1
2
3
4
5
6
7
8
9
10
11
12
Fig. 41
1
Fig. 19
Fig. 34
– 20 –
12
1
2
3
4
5
6
7 Fig. 38
8
9
2
1
Fig. 11
Fig. 26 Fig. 27
1
2
Fig. 15
Fig. 30 Fig. 31
Fig. 27
Fig. 19
Fig. 34 Fig. 35
Fig. 27
Fig. 31
Fig. 23
Fig. 38 Fig. 39
Fig. 31
Fig. 35
Fig. 35
Fig. 39
icon