Napoleon HYBRID 150 Instructions D'installation Et D'opération page 29

○ Locate fl ange gasket over bolts of oil furnace mounting fl ange, prior to placing
bottom front cover up to mounting fl ange.
○ Adjust levelling bolt so mounting bolts on fl ange align with clearance holes in
bottom front panel when panel loosely fi t in fi nal position.
○ Correct position of bottom front panel has top fl ange of panel over top of fi rebox
front fl ange and underneath furnace bottom.
○ New bottom front panels in oil furnace module kits.
RIGHT HAND RA PANEL
NOTE
Not all oil burner module kits require adapter collar and second fi bre gasket.
Check "Manual" Addendum accompanying oil furnace module for specifi c assembly details.
STEP #14 STEP #14
○ Fasten bottom front cover to corner posts using hex head wildrill screws. Assemble burner, fl ange
adapter, and gaskets to oil furnace mounting fl ange bolts as per diagram.
○ Attach oil furnace sight glass, gasket, and bracket to bottom front panel using (2) hex screws.
BRASS NUTS
OIL BURNER
MOUNTING
FLANGE
OIL BURNER
ALL 115V ELECTRICAL PRE ASSEMBLED HARNESSES MUST BE INSTALLED AS PER
NO 115V ELECTRIC CIRCUIT HARNESS OR FIELD WIRING MAY PASS THROUGH CLEARANCE
SPACE BETWEEN HMF150 FURNACE BOTTOM AND FLOOR.
FAILURE TO COMPLY MAY RESULT IN ELECTRIC SHOCK, FIRE, PROPERTY DAMAGE OR
LEFT HAND RA PANEL
ADAPTER
COLLAR
FIBRE
GASKETS
INSTRUCTIONS.
PERSONAL INJURY.
FURNACE BOTTOM
BOTTOM FRONT
OIL FURNACE
SIGHT GLASS
GASKET
SIGHT GLASS BRACKET
LEFT HAND RA CONFIG SHOWN
W415-0910 / A / 09.16.10
29
FLANGE GASKET
FIREBOX FRONT
OIL FURNACE
COMBUSTION
CHAMBER
COVER
FLANGE