Or Cable Description - Boston Scientific SC-4108 Mode D'emploi

OR Cable Description

CAUTION: Do not immerse the OR Cable or extension in water or other liquids. The OR
Cable and extension are intended for one-time only use; do not resterilize.
The OR Cable is designed for two purposes:
• Connect the lead to the Trial Stimulator (see: "Trial Stimulator Description" on page 4) to
facilitate intraoperative stimulation testing from outside of the sterile field.
• Connect the lead to the Trial Stimulator during the trial phase.
The 2x8 OR Cable connects to (2) 8-contact leads. (When referring to the use of the OR
Cable, a lead refers to the proximal end of a lead, splitter, or extension.) The 2x8 OR Cable is
compatible with any Boston Scientific lead with an 8-contact proximal end.
Figure 1: 2x8 OR Cable
The 1x16 OR Cable connects to a 1x16 contact lead.
Figure 2: 1x16 OR Cable
The OR Cable extension may be used when desired to connect the OR Cable to the Trial
Stimulator.
Figure 3: OR Cable Extension
OR Cable Description
Clinician Trial Manual
90970871-06 REV A 1 of 197