Chapter 12 Screen Display For Remote Observation; Default Remote Screen - Gima 35134 Manuel De L'utilisateur

Chapter 12 Screen Display for Remote Observation

12.1 Default Remote Screen

Press the DISP key to shift screen to Observing Screen when setting Disp2 as "Obsev" in System Setup screen, as
shown in Figure 13.1.
Operation Instructions:
ECG lead: press it to shift the ECG monitoring circulatory among Ⅰ, Ⅱ, and Ⅲ, aVR, aVL, aVF and V.
Alarm silence: press it to enable or disable the alarm silence function.
Freeze: press it to freeze the ECG waveform and perform manual S-T segment analysis. Double press this key
within 2 seconds to lock or unlock the operation of all other buttons (except power switch) on the front
panel.
NIBP: press it to start or stop NIBP measure.
DISP: press it to shift the display to the Main Screen.
Operator's Manual for Patient Monitor
Figure 12.1 Screen display for remote observation
71