Oxycrg Screen; Operation Instructions - Gima 35134 Manuel De L'utilisateur

The patient ID is the unique identifier for the patient. When the patient ID changes, the system considers the
patient has changed.
Name: Enter the patient's name.
Bed: Enter the bed number.
Sex: Choose between M or F for male and female.
Age: Choose the age field and use the "Navigation Knob" to select an age.
Save: The operator can choose how much of the data that needs to be saved. The unit is hour. Once the time is
chosen, the system starts to save data from the current time. If OFF is selected, it means that the data will not
be saved. The system will determine the time range according to the available disk space. If no disk space
available, SAVE will be displayed as OFF. When the user intends to save the current ECG waveform permanently,
please delete the history files.
Exit: Press this key to return to the System Menu screen.

4.9 OxyCRG Screen

This screen displays the value or waveform of HR, SpO

4.9.1 Operation Instructions

Step 1: rotate the knob to move the gray cursor to the button "
your selection.
Step 2: rotate the knob to choose the setting. The time can be set as 1 minute, 2 minutes or 4 minutes. The third
channel waveform display can be set as RWAVE (Respiration waveform) or RR (Respiration Rate).
Step 3: press the knob to confirm your setting.
Pressing " " key to return to the Main Screen.
Operator's Manual for Patient Monitor
Figure 4.17 OxyCRG Screen
, and RESP waveform or Respiration Rate in selected time.
2
30
" or " " and press the knob to confirm