Gima 35134 Manuel De L'utilisateur page 136

Left and Right Panel
Figure 2.2 the left panel
Different ports are located in different positions of the monitor for operating convenience.
The cable and transducer ports are an the left panel, shown in Figure 2.2.
SpO : SpO

2
NIBP: NIBP hose connector

TEMP: TEMP probe connector

ECG/RESP: ECG cable connector

Symbol definition

With type BF applied parts and applicable during the defibrillator is used.
With type CF applied part and applicable during the defibrillator is used.
Caution. Please read the manual for details.
The power supply socket and ports are at the right panel, shown in Figure 2.3.
1.
2.
(optional).
3.
directly by connecting the specified USB data cable (optional) between the patient monitor and PC.
If the data cable is well connected between the PC and the Patient Monitor, the Patient Monitor
will be recognized automatically by PC as a disk device and prompt information will appear on the
computer, a removable disk named "PC-3000" appears on "My computer". Double click this disk,
you can see a data file which will be found out and retrieved later during the data uploading.
Operator's Manual for Patient Monitor
probe connector
2
：DC Power supply socket indication with rated voltage and current
：Serial communication port which is used to network with central monitoring system
：USB port (used for data uploading). The user can upload data from the monitor to the PC
Figure 2.3 the right panel
11