Chapter 3 Operations; Installation; Unpacking And Checking; Environmental Requirements - Gima 35134 Manuel De L'utilisateur

3.1 Installation

Devices connected to the equipment must meet the requirements of the applicable IEC standards. The system

configuration must meet the requirements of the IEC 60601-1-1 medical electrical systems standard. Any
personnel who connect devices to the equipment's signal input/output port are responsible for providing
evidence that the safety certification of the devices has been performed in accordance with IEC 60601-1-1. If
you have any question, please contact the manufacturer or your local dealers.
If it is not evident from the equipment specifications whether a particular combination with other devices is

hazardous, for example, due to summation of leakage currents, please consult the manufacturers or else an
expert in the field, to ensure the necessary safety of patients and all devices concerned will not be impaired by
the proposed combination.
The equipment shall be installed by personnel authorized by manufacturer.

☞
The software copyright of the equipment is solely owned by the manufacturer. No organization or individual
shall resort to modifying, copying, or exchanging it or to any other infringement on it in any form or by an
means without due permission.

3.1.1 Unpacking and Checking

1. Open the package, take out the monitor and its accessories from the box carefully and place it in a safe stable
and easy to watch position.
2. Open the user manual to sort the accessories according to the packing list.
Inspect the accessories for any mechanical damages

Check all the exposed leads and inserted accessories

Check whether any risk or abnormity exists in the device and its accessories before using the monitor. If

any abnormity (such as broken cable or crack of the enclosure etc.) is found, stop using this device.
When disposing of the packaging material, be sure to observe the applicable waste control regulations and

keep it out of children's reach.
Before use, please verify whether the package are intact, especially the packages of single use accessories. In

case of any damage, do not apply it to patients.
☞
Save the packing case and packaging material as they can be used if the equipment must be reshipped.
☞
The user can customize the module configuration by choosing necessary modules to meet your own needs.
Therefore, your monitor may not have all the monitoring functions and accessories.
Please contact the local dealer or our company in case of any problems. We will offer the best solution for your
satisfaction.

3.1.2 Environmental Requirements

Operator's Manual for Patient Monitor

Chapter 3 Operations

16