finishing
EN
12.3 finishing with combustibles
With Dynamic Heat Control™, you can finish the
appliance with any combustible materials except ap-
pliances with recessed installation. Air outlet opening
must be located out of reach of the user. Air outlet
opening must not be restricted by furnishings or
decor.
Recessed installation with Dynamic Heat Control™
WARNING
!
•
Shaded area must be non-combustible materials.
SHADED AREA MUST BE NON-COMBUSTIBLE
MATERIALS. Recessed installation requires recess
material to use non-combustible facing due to close
proximity to vent. Air outlet opening must be located
out of reach of the user. Air outlet opening must not
be restricted by furnishings or decor.
58
W415-1710 / B / 08.17.18