Napoleon Luxuria Serie Manuel D'installation page 66

finishing
EN
Secure GGA with 1 fastener and 1 washer on top and bottom of each GGA slider bracket (total of 4)
9.
holding the GGA tight to the GGA slider bracket surface throughout (Fig. 12). Tighten firmly enough to
hold GGA against GGA slider bracket. Do not fully tighten until adjustment is complete and during final
GGA installation.
The GGA catches should be installed toward the appliance. It may be necessary to loosen the GGA catch
10.
securing screws on the bottom of both sides of the GGA and slide them all the way towards the back of the
GGA. Retighten securing screws (Fig. 13).
66
W415-1710 / B / 08.17.18
GGA catch GGA catch securing
screws
Fig. 12
Outer glass
Fig. 13