Napoleon Luxuria Serie Manuel D'installation page 64

finishing
EN
Fully extend the two GGA slider brackets of the appliance outward (Fig. 5).
5.
Carefully hook GGA onto GGA slider brackets by aligning the horizontal tabs on the GGA with the
6.
horizontal slots in the bottom of the GGA slider brackets and moving the GGA back into the GGA slider
brackets (A). Ensure both top and bottom tabs of the GGA engage with hooks of the GGA slider brackets
(B) (Fig 5).
Install 2 vertical adjustment screws underflush of GGA slider bracket surface (C) (Fig. 6).
7.
B
64
W415-1710 / B / 08.17.18
A
C
Bottom Hook
Heat Rail
(with Gasket)
GGA slider bracket
Fig. 6
A
B
Fig. 5