Napoleon Luxuria Serie Manuel D'installation page 68

finishing
EN
Check if the GGA plane is straight. Adjust with horizontal adjustment screws on both ends, if necessary
12.
(Fig. 16).
Move forward
Move forward
Check if the latches are correctly positioned (Fig. 17). Adjust latches, if necessary. Retighten the screws
13.
securely but do not overtighten.
68
W415-1710 / B / 08.17.18
Fig. 16
Latch too high -
won't disengage
Fig. 17
note:
If facing material is not installed plumb and square,
it may be necessary to make final horizontal GGA
adjustments after finishing.
Latch too low -
won't engage
Fig. 18 Fig. 19