Replacing The Oven Lamp; Storage Compartment - Elba EX 106 M Mode D'emploi

REPLACING THE OVEN LAMP

WARNING: Ensure the appliance is
switched off and disconnected from the
electrical power supply before replacing
the lamp to avoid the possibility of
electric shock.
Let the oven cavity and the heating
•
elements to cool down.
Switch off the electrical supply.
•
Remove the protective cover "A" (fig.
•
B
6.13).
• Replace the
with a new one suitable for high
temperatures
following specifications: 220-240 V,
50-60Hz and same power (check watt
power as stamped in the lamp itself) of
the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from


your fingers can cause premature failure. Always use a clean cloth or gloves.
Refit the protective cover.
•
Note: Oven lamp replacement is not covered by your guarantee.

STORAGE COMPARTMENT

The storage compartment is accessible through the pivoting panel (fig. 6.14).
Do not store flammable material in the oven or in the storage compartment.
A
halogen lamp
(300°C) having
C
"C"
the
WRONG
A CORRECT
Fig. 6.13
Fig. 6.14
53 53