Elba EX 106 M Mode D'emploi page 12

Fig. 1.2
Fig. 1.3
0
+ 8
mm
Fig. 1.4
+ 8
mm
+ 15
mm
12 12
LEVELLING THE COOKER
The cooker is equipped with 4 LEVELLING
FEET and may be levelled by screwing or
unscrewing the feet with a spanner (fig.
1.2).
The adjustable feet are already fitted to the
cooker but the locking nuts which can be
found in the oven packaging require to be
fitted as detailed on figures 1.3 - 1.4.
It is important to observe the prescriptions
of figures 1.3 - 1.4.
BACKGUARD
SOME MODELS ONLY)
Before installing the cooker, assemble the
backguard "C" (fig. 1.5).
• The backguard "C" can be found
packed at the rear of the cooker.
Before assembling
•
protective film/adhesive tape.
Remove the two spacers "A" and the
•
screw "B" from the rear of the cooktop.
Assemble the backguard as shown
•
in figure 1.5 and fix it by screwing the
central screw "B" and the spacers "A".
SOME MODELS ONLY
(SUPPLIED WITH
remove
B
A
Fig. 1.5
any