Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is
switched off and disconnected from the
electrical power supply before replacing
the lamp to avoid the possibility of
electric shock.
•
Let the oven cavity and the heating
elements to cool down.
•
Switch off the electrical supply.
•
Remove the protective cover "A" (fig.
B
6.7).
•
Replace
the
with a new one suitable for high
temperatures
following specifications: 220-240 V,
50-60Hz and same power (check watt
power as stamped in the lamp itself) of
the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from
your fingers can cause premature failure. Always use a clean cloth or gloves.
•
Refit the protective cover.
Note: Oven lamp replacement is not covered by your guarantee.
The intended purpose of the lamps, fitted on this appliance, is to illuminate the oven cavity
and thus help the user to better monitor the food while cooking. These lamps are not
suitable for other usage (e.g. environments lighting).
This product contains more than one light source of energy efficiency class G.
STORAGE COMPARTMENT
The storage compartment is accessible through the pivoting panel (fig. 6.8).
Do not store flammable material in the oven or in the storage compartment.
A
halogen
lamp
(300°C)
having
C
"C"
the
WRONG
A
CORRECT
Fig. 6.7
Fig. 6.8
49
49
Publicité
Table des Matières
