Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
INSTALLATION
The installation conditions, concerning protection against overheating of the surfaces
adjacent to the cooker, must conform to figs. 1.1a or 1.1b.
The appliance must be kept no less than 200 mm away from any side wall which exceeds
the height of the hob surface (figs. 1.1a or 1.1b).
The veneered syntetical material and the glue used must be resistant to a temperature of
150°C in order to avoid ungluing or
deformations.
Curtains must not be fitted immediatly
behind appliance or within 500 mm of
the sides.
If the cooker is located on a pedestal
it is necessary to provide safety
measures to prevent falling out.
The appliance must be housed in
heat resistant units.
The walls of the units must not be
higher than work top and must be
capable of resisting temperatures
of 70°C above room temperature.
Do
not
Fig. 1.1a
near inflammable materials (eg.
curtains).
■
(fig. 1.1a)
Gas connection made using rubber
hose which must be visible and
easily inspected or using rigid or
flexible metal pipe.
A space of at least 2 cm must be left
between the cooker and any adjacent
furniture, which must not exceed the
height of the cooktop.
■
■
(fig. 1.1b)
Fig. 1.1b
Gas connection made using rigid or
flexible metal pipe.
instal
the
appliance
Class 1
Class 2
Subclass 1
11
11
Publicité
Table des Matières
