Elba EX 106 M Mode D'emploi page 17

CONNECTING THE APPLIANCE TO THE GAS SUPPLY
The gas connection must be carried out by an authorised person according to the relevant
standards.
Ensure that the room in which the cooker is to be installed is adequately ventilated, in
compliance with applicable regulations.
Connect the cooker to the gas mains utilizing rigid or flexible pipes.
•
The gas supply is connected at the rear of the cooker to the right or left terminal of the
•
gas inlet pipe (fig. 2.1a). The connection pipe must not cross the rear of the appliance.
The unused inlet pipe must be closed off with the plug and sealing washer supplied
•
(fig. 2.1b).
Fitting the plug on the unused
terminal of the gas inlet pipe
Right or left
inlet pipe
Manifold male
pipe fitting
1/2" G cylindrical
(ISO 228-1) male
Sealing
washer (#)
1/2" G cylindrical
(ISO 228-1) female
Plug (#)
(#) Already fitted on the right or
left inlet pipe
Plug
Fig. 2.1a
Fig. 2.1b
17 17