Gas Information - Atag IG9071MX Mode D'emploi

INSTALLATION
1. Connect the appliance to the electricity supply. The displays will
light up briefly.
2. Check its operation. If the appliance has been connected
incorrectly, it will emit a beep signal or the displays will not
illuminate.
3. Hand over the instructions to your customer.
Immediately after switching on the fan will start. The appliance will
now carry out a self-check for a few seconds.
Install appliance and make connections
Place the appliance in the worktop and secure it using the mounting
brackets and screws supplied.
Connect to the gas supply.
Check with soap suds that the connection is gastight.
Connect the appliance to mains electricity.

Gas information

G25 G20
25 mbar 20 mbar
Burner type (kW) (kW)
Wok 5.70 5.70
186
building in
G25 G30 G31 G31 G30
20 mbar 29 mbar 29 mbar 37 mbar 50 mbar
(kW) (kW/g/h) (kW/g/h) (kW/g/h) (kW/g/h)
5.00 5.50/396 4.85/350 5.50/396 5.50/396 4.75/342
G31
50 mbar
(kW/g/h)
187