Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Cut opening in worktop
Saw the opening in the worktop. This should be done very accurately
(see table). Also saw out any partitions that may be present. The distance
from the saw line to the rear wall and/or side wall is indicated in the
table.
If the woodtop is made of treated wood, then coat the sawn surfaces of
the top with sealing varnish, to prevent moisture causing the top to swell.
Attachment points for mounting brackets
threaded hole /
screw / worktop
180
building in
thin worktops
thick worktops
INSTALLATION
Building in dimensions
1*) attachment point for mounting bracket
904
min.50
490
1*
building in
522
48
860
220
1*
G1/2"
181
Publicité
Chapitres
