Atag IG9071MX Mode D'emploi page 78

USE INDUCTION COOKING ZONES
Childproof lock
The appliance is fitted with a childproof lock. If the childproof lock is
switched on, the controls cannot be used.
The childproof lock can only be switched on if none of the zones or
cooking timers have been activated.
locking
Press the key symbol.
The light above the key symbol will light up.
unlocking
Press the key symbol (± three seconds).
The light above the key symbol will go out.
Memory function
The appliance is fitted with a memory function. This function enables
the cooking settings and associated cooking times to be programmed for
each cooking zone individually.
switching on memory function (play)
1. Press the 'memory' button briefly. The light next to 'PLAY' comes on.
The lights next to 'REAR' and 'FRONT' start to flash.
2. Switch on a cooking zone. The cooking zone goes to the cooking
setting that has been programmed. If there is no programme present,
the zone switches off again after a few seconds.
Switch the zone off with the on/off switch or the 'memory' button.
154
setting USE INDUCTION COOKING ZONES
If, during the running of a programme, a high power level is selected at
the same as another zone is set manually to a high power level, the other
zone will switch to a lower power level. The settings of the programme,
therefore, are dominant. If the programme sets the zone at a lower power
level, the other zone will not switch back to the high power level.
programming memory function (record)
1. Press the 'memory' button until the light next to 'RECORD'
comes on.
The lights next to 'REAR' and 'FRONT' start to flash and 000 appears in
the clock display.
2. Switch on the cooking zone that should be recorded.
3. Select a cooking setting, using the + or – buttons.
The selected cooking setting and the cooking time are now recorded.
Several cooking settings can be selected in succession (max. 38).
If, during a recording, 38 settings have already been recorded, the next
step that is recorded will automatically be the end of the recording.
4. End the recording using the on/off button or the 'memory' button
When a new recording is entered, any existing recording is erased.
The selected cooking settings and cooking times are now in the memory.
This recording can be activated using the 'PLAY' function (switch on
memory).
A maximum of one recording can be made per zone.
setting
.
155