Ricloud Control Class Declaration, According To The Erp Directive - Riello RiCLOUD Notice Installateur Et Utilisateur

RiCLOUD ON/OFF contact always maintains the same technical characteristics
(RiCLOUD relay, WiFi Box relay, boiler RF receiver relay) wherever it is positioned
and these must be respected when connecting the relay and the components
it controls via cable. NOTE: Never exceed the maximum electrical loads (see page
211).
NOTE 1
The display range for the room temperature is between -7°C and +50°C.
NOTE 2
The display range for the external temperature is between -40°C and +60°C.
Temperatures outside of these ranges are shown as three dashes "- - -".
1.5 RiCLOUD control Class Declaration, according to the ErP
Directive
With reference to Delegated Regulation (EU) No. 811/2013, the data in the table
can be used to complete the product data sheets and energy labelling of space
heaters, combination heaters, packages of space heater, temperature control
devices and solar devices.
Manufacturer/Brand
RIELLO SpA / RiCLOUD
Possible RiCLOUD configurations, the relative configuration classes and the
energy contribution to the system.
Boiler
characteristics
Boiler with
fixed delivery
temperature (ON/
OFF control)
Boiler with
variable delivery
temperature
(controlled by
communication
bus)
Boiler with
variable delivery
temperature
(controlled by
communication
bus)
RiCLOUD configuration
RiCLOUD ON/OFF connection
Connection via communication bus to
RiCLOUD. Delivery temperature to the
boiler calculated on the basis of one
room temperature only
Connection via communication bus to
RiCLOUD. Delivery temperature to the
boiler calculated on the basis of the
room temperature and the external
temperature (given by the external
probe or via the web).
Model
RiCLOUD
54
Class and
contribution
I = 1%
V = 3%
VI = 4%