Setting The Heating/Cooling Room Setpoint Temperature - Riello RiCLOUD Notice Installateur Et Utilisateur

Press the SET/PROGRAM button to
confirm the day or period of the week
to be changed.
Press the FORWARD
to select the time segment to be
changed.
Press the ESC/MODE button to activate
or deactivate the domestic hot water
function.
Press the UP button
previous setting to the following time
segment (the DOWN
used to go back or copy the setting to
the previous time segment).
Press the SET/PROG button to save
and return to the programming
menu, press ESC/MODE to save and
exit the programming menu, or wait
30 seconds to automatically save the
value and return to the HOME screen.
3.9 Setting the heating/
cooling room setpoint
temperature
To change the T1/T2/T3 room setpoint
temperature, press the SET/PROGRAM
button from the HOME screen to enter
the user menu.
Press the FORWARD
to select the field HEATING/COOLING
TEMPERATURE.
Press the SET/PROG button to set.
or BACK button
to copy the
button can be
or BACK button
73
Press the FORWARD
to select the temperature to be
changed.
Press the UP or DOWN
to modify the selected room setpoint
temperature.
9
The T3 temperature (comfort)
cannot be higher than 35°C
or less than or equal to T2
(economy).
9
The T2 temperature (economy)
cannot be higher than or equal
or BACK button
button