Setting The Heating/Cooling Mode - Riello RiCLOUD Notice Installateur Et Utilisateur

3.4 Setting the heating/
cooling mode
RiCLOUD is default set to heating
mode.
In heating mode, RiCLOUD activates
a request for heat when the room
temperature is
temperature.
In cooling mode, RiCLOUD activates an
ON request (where there is a cooling
system) when the room temperature
is above the set temperature.
From the HOME screen, press the SET/
PROGRAM button to open the user
menu.
Press the FORWARD
to select the field HEATING/COOLING.
Press the SET/PROG button to set.
below the set
or BACK button
Press the UP or DOWN
select the desired mode.
IN=WINTER
Heating mode.
SU=SUMMER
Cooling mode.
Press the SET/PROG button to save
and return to the programming
menu, press ESC/MODE to save and
exit the programming menu, or
wait 30 seconds to automatically
save the value and return to the
HOME screen
9
If at least
thermostat is in cooling mode,
the heating request via OTBus is
not considered.
66
button to
one RiCLOUD