Maintenance And Cleaning Of The Dust Filter - TERMA WEBL1K906F Mode D'emploi

MAINTENANCE AND CLEANING
OF THE DUST FILTER
Before any maintenance work, switch off the device by
pressing the button (switch). The device can be cleaned
with a damp cloth; never use abrasives or solvents.

MAINTENANCE AND CLEANING OF THE DUST FILTER

The blower is equipped with a removable dust filter that
stops the pollution from the air sucked in from the room.
When the filter is full, accumulated dust can stop the device.
In Boost mode, the writing FILT appears on the display.
Before any action of filter removal, switch off the device
by pressing the button located under the blower.
To clean the filter, proceed in the following order:
① Press the filter strip by the right or the left side then
take it out from its slot.
74
② Use a vacuum cleaner to eliminate the dust deposited
on the filter. If the filter is very dirty, wash it under
the water tap with a damp sponge. After washing the
filter, let it dry.
Important: it is recommended to clean the filter at least
once a month, unless the inscription FILT appears on
the display before.
③ Once cleaned and dried, place the filter in its slot by
inserting it into the guides.