TERMA WEBL1K906F Mode D'emploi page 56

While Auto, Comfort, Eco or Frost protection mode,
press for 5 seconds. Move the cursor to the
symbol , then symbol
Prior information:
display area
2
The days of the week are all displayed. The default
program Auto (Auto Program, see page 53) appears on
the display.
1 2 3 4 5 6 7
② Press
or .
The program affected by
default Auto, flashes. It will
be applied to all the days
of the week.
③ Chose the program you want for this day with
or .
Save by pressing .
④ The program assigned to the second day of the week
(Tuesday) will flash. Repeat the procedure described
previously (in point 3) for each day of the week.
⑤ Once you have chosen a program for each day, confirm
your selection by pressing
will successively scroll on display with the programs
that you set for them (P1, P2, P3, CONF or ECO). To
exit the Programming mode, press
56
, press again.
Days of the week and
corresponding numbers
Monday 1
Tuesday 2
Wednesday 3
Thursday 4
Friday 5
Saturday 6
Sunday 7
. The days of the week
twice.
VIEWING THE PROGRAMS THAT YOU HAVE
SELECTED
— While in Auto, Comfort, Eco or Frost protection mode,
press for 5 seconds. Press
for each day of the week (Comfort, Eco, P1, P2 or P3)
will scroll on display in front of you.
— To exit the program viewing mode, press
MANUAL AND TEMPORARY EXEMPTION FROM
A RUNNING PROGRAM
This function allows you to change the setting temperature
temporarily until the next scheduled change in temperature
or the transition to 0:00 (the midnight).
Example:
① The device is in Auto mode, the running program is
Eco 15,5°C.
3
② By pressing
or
the desired temperature up to 18°C for example.
3
Note: The cursor corresponding to the operating
mode, i.e Eco mode in our example, is blinking during
the duration of the temporary derogation.
③ This change will be automatically cancelled at the next
change of program or transition to 0:00.
3
twice, the program
twice.
, you can change temporarily