Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SETTING THE COMFORT MODE TEMPERATURE
You can access the Comfort temperature set up from the
Auto and Comfort Mode. It is preset to 19°C.
Using
and
you can adjust the temperature from
7°C to 30°C by intervals of 0.5° C.
Note: you can limit the Comfort temperature, see page
62 for more details.
CONSUMPTION INDICATION ACCUMULATED IN
KWH, ENERGY SAVINGS
It is possible to see the estimation of energy consumption
in kWh since the last reset of the energy meter.
DISPLAY OF THE ESTIMATED POW-
ER CONSUMPTION
While in Auto, Comfort,
Eco or Frost protection
mode, press
to see the
estimation.
Press
or
to return the display to its previous
operaing mode.
CHILD ANTI-TAMPER, KEYPAD LOCK/UNLOCK
KEYPAD LOCK
To lock the keypad, press
the
and
buttons
and hold them down for
10 seconds.
The padlock symbol
ap-
pears on the display, the
keypad is locked.
KEYPAD UNLOCK
To unlock the keypad, press the
52
RESETTING THE ENERGY METER
To reset the energy meter, from Auto, Comfort, Eco or
Frost protection mode, then proceed as follows.
① Press
② Press simultaneously
1 2 3 4 5 6 7
them down for 10 seconds again. The padlock symbol
disappears from the display, keypad is unlocked.
3
If the device entered standby mode
with the keypad locked, you must
first activate the device to access
the keypad.
and
buttons hold
.
5 seconds.
Then press
or
for more than 5 seconds.
Important: when the keypad is locked, only the
stand-by button (switch) is active.
et
for more than
Publicité
Table des Matières
