Boost Feature; First Press : Boost - TERMA WEBL1K906F Mode D'emploi

③ Without program
Comfort mode
Non-stop Comfort mode.
The device will operate 24
hours a day to achieve the
temperature which has been
set (e.g. 19°C). The Comfort
mode temperature level can
be set by the user (see page
52).
Eco mode
Eco, which means the Com-
fort Mode temperature mi-
nus 3.5°C. This enables you
to lower the temperature
without having to reset the
Comfort Mode temperature.
Select this mode for shortterm
absences (between 2 and
24 h) and during the night.

BOOST FEATURE

Important: the Boost mode can be enabled at any time,
whatever the current operating mode (Auto, Comfort,
Eco or Frost protection).
To activate Boost mode, press
ature setting will be set at maximum for the time period
you request. 60 minutes display will flash by default.
Comment: if the heating indicator is switched on, the
blower switches on and heats the room in addition to
the heat emitted by the device.

FIRST PRESS : BOOST.

During the first minute: the boost symbol and the heating
indicator appear and the duration count flash.
This mode enables you to
protect your home against
the effects of cold weather
(frozen pipes, etc.), by main-
taining a minimum tempera-
ture of 7°C in it at all times.
Select this mode when you
will be away from your home
for a long time (more than
5 days).
Restoring factory settings See page 68.
During the first minute, you can modify the Boost duration
from 0 to the maximal authorised duration of the Boost,
such as defined during the advanced settings (see page
63 for more details) by intervals of 5 minutes (or more
quickly by push superior to 2 seconds) by pressing
, the desired temper-
and
the next Boost. After 1 minute, the Boost count begins
and the time is running, minute by minute.
Comment: After 1 minute, you can modify temporarily
the duration: it will be valid only for this active Boost and
therefore non-recurring.
Frost protection mode
. This modification will be saved and effective for
49
EN