Intended Use Of Device; Technical Information - TERMA SOA Mode D'emploi

Intended use of device

The heating element is an electric device
intended solely for installation in radiators
(standalone or connected to the central heat-
ing system).

Technical information

Model markings
(power cable type):
Type of electrical connection: Y
Heat outputs available: 100, 200, 300, 400, 500, 600, 800, 1000, 1200 [W]
Power supply: 230 V / 50 Hz
Insulation class: Class II
Towel rail connection thread: G 1/2"
Casing protection class [IP]: IPx5
The maximum pressure allowed
in the radiator:
Length of heating element: 100 200 300 400 500 600 800 1000 1200 [W]
* Device intended to be connected permanently to the system
Heating element power output should be
matched with radiator output for parame-
ters of 75/65/20° C
PB (Straight cable without plug) *
PW (Straight cable with plug)
1.0 MPa
165 220 260 350 350 465 600 670 810 [mm]
EN
43