Internal Temperature Monitoring; Restoring Factory Settings - TERMA WEBL1K906F Mode D'emploi

② To save and move automatically to the next setting
press .
③ To exit the Expert settings, press
INTERNAL TEMPERATURE
MONITORING
An integrated overheating safety is present on our blower.
It is activated when an internal temperature limit is reached:
the blower and its controller will stop immediately.
The maximum setting is preset to 65°C. You can adjust
from 60°C to 90°C by intervals of 5°C.
Press or then save by pressing
If you do not want to change it, press
changes automatically to set the next setting.
To exit the Expert settings, press
3 times.
.
: the device
1 2
3 times.

RESTORING FACTORY SETTINGS

If the PIN code protection is disabled, the user, installer
and expert settings are re-initialized:
① From the internal temperature monitoring setting,
press . rest appears on the display.
② N O appears. Press
yes = Factory settings reset
NO = Factory settings not reset
③ Press the key
for 5 seconds. The device returns
to its initial configuration and goes back automatically
to the Auto mode.
or to select YES.
5 sec.
EN
71