TERMA WEBL1K906F Mode D'emploi page 55

— P2 : your device will operate in Comfort mode from
06:00 to 09:00 and from 16:00 to 22:00 (and in Eco
mode from 09:00 to 16:00 and from 22:00 to 06:00).
— P3 : your device will operate in Comfort mode from
06:00 to 08:00, from 12:00 to 14:00 and from 18:00
to 23:00 (and in Eco mode from 23:00 to 06:00, from
08:00 to 12:00 and from 14:00 to 18:00).
POSSIBLE PROGRAMS MODIFICATIONS
If the default time schedules for the P1, P2 and P3 pro-
grams does not suit your routines, you can change them.
Modifying the P1, P2 or P3 programs.
If you modify the time schedules for the P1, P2 or P3
programs, the schedules will be modified for all the days
of the week for which P1, P2 or P3 had been set.
① If you just set the time and day, go to step 2. From
Auto, Comfort, Eco or Frost protection mode, press
for 5 seconds.
When the triangle pointer indicates the setting time
symbol , press shortly.
1
② Press
or . The cursor moves to prog.
1
③ With or , select P1. P1 will flash. Press
for 5 seconds to make changes.
1
④ The P1 start time (which by default is 06:00) will flash.
Using or , you can change the start time, by
increments of 30 minutes.
Save by pressing .
⑤ The P1 end time (which by default is 22:00) will flash.
Using or , you can change the end time, by
increments of 30 minutes.
Save by pressing .
⑥ Press
to exit the programming Mode and return
to Auto Mode.
Note: if no key is pressed, it will return to Automatic mode
after a few minutes.
SELECTING AND OPERATING PROGRAMS
① If you just set the time and day, the cursor moves
automatically under PROG.
2
1
5 sec.
1
2
1
2
55
EN