Fitting And Connections; Positioning The Cartridge (Heating Pipe); Fitting The Blower On The Towel Rail - TERMA WEBL1K906F Mode D'emploi

FITTING AND CONNECTIONS

Connection tasks must be carried out by a qualified professional installer.
POSITIONING THE CARTRIDGE
(HEATING PIPE)
Heating cartridge should be placed in a right hand manifold
of the radiator. The stand-alone electric heater should be
filled with heating medium up to 92% of its volume. The
power output of the heating cartridge must not exceed the
radiators power output for the parameters 75/65/20° C.
* If your radiator has a heating cartridge already installed,
go directly to the chapter FITTING THE BLOWER ON
THE TOWEL RAIL.
Bottom of
the towel rails
FITTING THE BLOWER ON THE
TOWEL RAIL
① Place
the 2 brackets between
the tubes of the towel rail.
② Position the blower
behind the towel rails
and insert the brackets
in the blower's handles.
③ Adjust the blower position
④ Lock the position of the device by screwing the 2 nuts
on the brackets
92%
Note: Distance to the
wall should be less than
20 mm.
Wall
20 mm
75
EN