General Description - GYS PACK PRO Mode D'emploi

Translation of the original instructions
• Equipment in compliance with British requirements. The British
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on
Disposal:
• This product should be disposed of at an appropriate recy-
• The battery fitted in this device is recyclable. Please proceed
• The battery must be removed from the device before the
• The device must absolutely be disconnected from the pow-

GENERAL DESCRIPTION

The high performance internal battery allows the GYSPACK PRO to serve 4 functions:
• Battery test
• Instant Start from vehicle equipped with 12V Lead battery (Gel or Liquid electrolyte).
• 12 V DC power supply, to supply light Spot, TV, tools, etc...
• In-built torch
To ensure good working conditions and optimize the durability of its
internal battery, it is important to recharge it after each use, and leave
it plugged in until next usage.
BATTERY TEST FEATURE
Test of internal battery before the start
In order to test the internal battery, press
- Green light: Internal battery is charged. Starting is possible
- Voyant orange :
- Voyant rouge :
STARTING A VEHICLE
Do not disconnect the battery from the vehicle. Disconnecting the battery may result in loss of information
and a possible inability to restart.
The booster must be stored in a vertical position. Any other storage position should only be temporary.
In order to use the GYSPACK PRO as a starter, follow these steps:
• Disconnect the GYSPACK PRO from the mains. Turn the vehicle ignition key to OFF.
• Position the switch «OFF».
10
Declaration of Conformity is available on our website (see
home page).
our website (see cover page).
cling facility. Do not dispose of in domestic waste.
according to the applicable recycling regulations.
latter is discarded.
er supply network before removing the battery.
{
Attention !!! Please do not use the machine when the orange or red light is
lit ! You need to recharge it first.
GYSPACK PRO
and the result will be displayed:
EN