Stiebel Eltron DHE Connect 18 Utilisation Et Installation page 96

INSTALLATION
Standard installation
Installing the appliance
Note
If you are installing the appliance with flexible water
connections, also secure the back panel with a screw.
1 Cable entry installation aid
2 Cable grommet
Use the installation aid for easier wiring access through the cable
grommet (see plastic parts set supplied).
f Remove the cable grommet from the back panel. f
f Pull the cable grommet over the cable sheath of the power f
cable. For large cable cross-sections, enlarge the hole in the
cable grommet if necessary.
96 |DHE Connect | DHE Touch
1
2
f Remove the transport protection plugs from the water f
connections.
f Bend the power cable 45° upwards. f
f Route the power cable and cable grommet through the back f
panel from the rear.
f Install the appliance on the threaded studs of the wall f
mounting bracket.
f Push the back panel firmly against the wall. Lock the fixing f
toggle by turning it 90° clockwise.
f Pull the cable grommets into the back panel until both lock- f
ing tabs engage.
www.stiebel-eltron.com