Stiebel Eltron DHE Connect 18 Utilisation Et Installation page 94

Masquer les pouces Voir aussi pour DHE Connect 18:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 124
INSTALLATION
Standard installation
11.
Standard installation
Opening the appliance
f Open the appliance by holding the fascia at the side and pull-
f
ing forwards away from the appliance cover. Undo the screw.
Pivot open the appliance cover.
f Remove the back panel by pressing the two locking tabs and
f
pulling the lower back panel section forwards.
94
|DHE Connect | DHE Touch   
Preparing the power cable
160
30
1 Cable entry installation aid
f Prepare the power cable.
f
Fitting the wall mounting bracket
f Mark out the holes for drilling using the installation tem-
f
plate. If the appliance water connections are to be installed
on finished walls, also mark out the fixing hole in the lower
section of the template.
f Drill the holes and secure the wall mounting bracket at 2
f
points using suitable fixing materials (screws and rawl plugs
are not part of the standard delivery).
1
www.stiebel-eltron.com

Publicité

Table des Matières
loading

Table des Matières