Service Information; Unpairing All Wireless Subscribers; Menu Structure - Stiebel Eltron DHE Connect 18 Utilisation Et Installation

INSTALLATION
Service information
After successful pairing, the yellow LED flashes quickly several
times in succession and then goes out.
If the pairing was unsuccessful, the LED continues to flash until
registration mode ends (30 seconds in total).

14.15 Unpairing all wireless subscribers

f To unpair all wireless subscribers, press the button and hold f
for 5 seconds.

15. Service information

Settings
Menu structure
 „
Service
…  Fault
…  Contractor contact
…  Appliance details
…  Service code
… … Control menu
… … Network diagnostics
110 |DHE Connect | DHE Touch
Description
Display when faults are present.
Storing data
Type | Product ID | QR code. The QR code enables fast access to our internet site from a mobile terminal de-
vice (smartphone or tablet).
Entering the Service code brings up the "Control menu" and "Network diagnostics" menu items.
► Enter service code "1000".
► Enable the Service code with the tick symbol ("Service level 1" appears on the display). Continue using
the arrow symbol.
► "Service level 1" is disabled by pressing "Disable level 1"
You can call up appliance information here.
For DHE Connect only: You can obtain network information here.
www.stiebel-eltron.com