Stiebel Eltron DHE Connect 18 Utilisation Et Installation page 80

OPERATION
Settings
Settings
You can make individual settings for currency, temperature (Cel-
sius °C/Fahrenheit °F) and volume (litres/gallons).
Menu structure
 „ Temperature memory
…  Maximum
 „ ECO
 „ Bath filling
 „ Programming unit
…  Touch-Wheel
…  Icon size
…  Activate functions
…  Sort functions
…  Brightness
…  Time until dimming
…  Time until OFF after dimming
…  Calibrate Touch-Display
 „ Language
80 |DHE Connect | DHE Touch
Description
Store up to 12 names and temperatures.
The maximum temperature allows you as a user to restrict the adjustable set temperature at the ap-
pliance to a maximum value. Check that the upper temperature limit has been correctly applied. To
deactivate the maximum function for 5 minutes:
► Press the symbol for 5 seconds to deactivate the maximum function for 5 minutes.
36,0 °C
Your qualified contractor can set an additional temperature limit for anti-scalding protection. This
temperature then dictates the upper limit of the setting range for the temperature limit function.
Reduce flow rate to the preset value.
The flow rate is significantly reduced once the bath fill volume is reached.
Select functions for the programming unit.
Temperature, volume (selectable with DHE Connect only), no function
Select the display view.
Functions for the start screen.
Sequence of functions on the start screen.
Set the display brightness.
Dim the display.
Switch off the display after dimming.
You can carry out recalibration if the Touch-Display is not working properly.
Select the display language.
Conversion factor:
1 litre = 0.26417 gal. (3.78541 litres = 1 gal.)
www.stiebel-eltron.com