Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10.
Maintenance / repair
Attention!
Attention!
Attention!
Attention!
Attention!
11.
Dismantling and disposal
>
The pump, the hose and the fittings must be emptied prior to dismantling.
>
Collect environmentally harmful substances and liquids in appropriate containers and
dispose of them in an environmentally sound manner.
>
Dispose of scrap material and parts that cannot be repaired or reused in an environ-
mentally sound manner.
12.
Technical data
12.1 Ex-marking
The ex-marking is lasered directly onto the pump tube next to the outlet on the
corresponding eccentric worm-drive pump F 550 S ... X ... TR and reads as follows:
II 1/2 G Ex h IIB T4...T3 Ga/Gb
12.2 Sound level measurement
Pump
F 550 S .../ F 560 S ...
*1 Sound level measured with a standard silencer.
*2 Sound level dB (A) measured with 4 m exhaust hose 3/8'' and fine-filter silencer FS 3.
44/80 Original operating instructions Eccentric worm drive pump F 550 S ... TR and Sanitary pump F 560 S ... TR
Always replace defective mains connection.
Changes to the mains connection may only be carried out by
trained electricians.
Regularly check visually the external condition of the pump.
Remove motor from pump when repairing the pump.
Always replace defective parts.
Only use genuine spare parts.
The solid stator and the eccentric worms are marked with ex on the
face side. Only these may be used as spare parts. If the ex sign is
no longer visible, the respective parts must be replaced.
Regularly check the hose clips resp. connectors for firm seating.
Three-phase motor
700 rpm
930 rpm
< 70
< 70
Compressed-air motor
(n~1,000 1/min)
0,5 kW
1,1 kW
*1
*2
*1
*2
89
/ 78
87
/ 69
1,8 kW
*1
*2
89
/ 77
Publicité
Chapitres
Table des Matières
