Dismantling / Re-Assembly Of The Open Mechanical Seal F 550 S - FLUX F 550 S TR Serie Notice D'instructions Originale

Dismantling / re-assembly of the open mechanical seal F 550 S .... TR
9.3
sealing face
sliding face
torsion shaft
(drive shaft)
Attention!



42/80 Original operating instructions Eccentric worm drive pump F 550 S ... TR and Sanitary pump F 560 S ... TR
Attention – the slot at the counter ring must be
aligned with the pin in the centering disc.
Make sure that the sealing and sliding faces on the mechanical
seal will not be damaged.
Make sure that the sealing faces on outer tube and centering
disc will not be damaged.
Do not use any tools in dismantling the mechanical seal to avoid
any damage.
centering disc
pin
O-ring
counter-ring
sliding ring
slot
O-ring
stop washer
spring
sealing face