Maintenance / Repair; Dismantling And Disposal - FLUX F 550 Serie Notice D'instructions

10.

Maintenance / repair

Attention!


Attention!

Attention!



Attention!

Attention!

11.

Dismantling and disposal

> The pump, the hose and the fittings must be emptied prior to dismantling.
> Collect environmentally harmful substances and liquids in appropriate containers
and dispose of them in an environmentally sound manner.
> Dispose of scrap material and parts that cannot be repaired or reused in an
environmentally sound manner.
Original operating instructions Eccentric worm drive pump F 550 and Sanitary pump F 560
Always replace defective mains connection.
Only trained electricians may carry out changes to the mains
connection.
Regularly check visually the external condition of the pump.
Remove motor from pump when repairing the pump.
Always replace defective parts.
Only use genuine spare parts.
The solid stator and the eccentric worms are marked with ex on the
face side. Only these may be used as spare parts. If the ex sign is
no longer visible, the respective parts must be replaced.
Regularly check the hose clips resp. connectors for firm seating.
47/88