Cleaning; Maintenance Of The Gear; Maintenance Of The Planetary Gear Gs (Gsx) / Gs 1/2/3 (Gs 1/2/3 X); And Gs 6 - FLUX GS Notice D'instructions

The electrically conductive base ground must be an integral part of the equipotential
bonding system.
If a conductive base ground is not available, equipotential bonding conductors must be
connected to all barrels and containers.
> Note
Explosion protection at the connection point is not necessary if the
power socket or the terminal box is clearly located outside the
hazardous area.
5.

Cleaning

The intensity and the time intervals of the cleaning depend on the requirements on the
medium to be pumped. For intensive cleaning, the motor has to be dismantled and the
pump has to be disassembled.
> Attention!
 Only clean pump, motor, gear and mains connection outside the
> Attention!
 Never store the motor / gear in areas in which corrosive vapours
>
Do not immerse bearing flange resp. gear into the cleaning agent.
>
When using flammable cleaning agents, comply with safety instructions as to
explosion-proof equipment.
> Observe internal instructions.
6.

Maintenance of the gear

6.1

Maintenance of the planetary gear GS (GSX) / GS 1/2/3 (GS 1/2/3 X)

and GS 6

> Attention!
 Only remove or mount the motor from or on the gear when the
> Caution - risk of injury!
 Wear protective clothing (face protection, protective gloves, etc.).
> Attention!
 Always replace defective parts.
 Only use genuine spare parts.
20/36
hazardous area.
exist.
motor shaft stands still.
Original operation instructions planetary gear